1.5h
| Location | Lat | Long | Condition | Risk | Comments | |
|---|---|---|---|---|---|---|
| 1 | — | — | — | — | — | |
| 2 | — | — | — | — | — | — |
| 3 | — | — | — | — | — | — |
| 4 | — | — | — | — | — | — |
| 5 | — | — | — | — | — | — |
| 6 | — | — | — | — | — | — |
| 7 | — | — | — | — | — | — |
| 8 | — | — | — | — | — | — |
| 9 | — | — | — | — | — | — |
| 10 | — | — | — | — | — | — |
| 11 | — | — | — | — | — | — |
| 12 | — | — | — | — | — | — |
| 13 | — | — | — | — | — | — |
| 14 | — | — | — | — | — | — |
| 15 | — | — | — | — | — | — |
| 16 | — | — | — | — | — | — |
| 17 | — | — | — | — | — | — |
| 18 | — | — | — | — | — | — |
| 19 | — | — | — | — | — | — |
| 20 | — | — | — | — | — | — |
20 min
| Location | Lat | Long | Condition | Risk | Comments | |
|---|---|---|---|---|---|---|
| 1 | Shell plate near hatch #2 | 50.795 | -113.808 | Minor corrosion | Low | Schedule next quarter |
| 2 | Pipe support brick wall | 50.795 | -113.808 | Medium corrosion | Med | Repair within 30 days |
| 3 | Horizontal process line | 50.795 | -113.808 | Surface damage | High | Immediate action req. |
| 4 | Pipe rack vertical | 50.795 | -113.808 | Coating damage | Low | Add to maint. plan |
| 5 | Small-bore drain line | 50.795 | -113.808 | Good condition | Low | No action needed |
| 6 | Process piping pedestal | 50.795 | -113.808 | Minor wear | Low | Monitor quarterly |
| 7 | Vessel shell plate | 50.795 | -113.808 | Heavy corrosion | High | Replace ASAP |
| 8 | Shell below manway | 50.795 | -113.808 | Surface pitting | Med | Apply coating |
| 9 | Tank roof plate #4 | 50.796 | -113.809 | Light rust | Low | Monitor next insp. |
| 10 | Flange connection B-12 | 50.794 | -113.807 | Gasket wear | Med | Replace gasket |
| 11 | Support beam junction | 50.795 | -113.810 | Stress cracks | High | Structural review |
| 12 | Valve assembly V-203 | 50.793 | -113.806 | Good condition | Low | No action needed |
| 13 | Insulation section 7 | 50.797 | -113.811 | Water damage | Med | Replace insulation |
| 14 | Weld seam WS-44 | 50.795 | -113.808 | Hairline crack | High | NDT required |
| 15 | Ladder attachment L3 | 50.794 | -113.809 | Loose bolts | Med | Torque to spec |
| 16 | Vent pipe VP-8 | 50.796 | -113.807 | Minor dent | Low | Cosmetic only |
| 17 | Foundation anchor #12 | 50.795 | -113.808 | Good condition | Low | No action needed |
| 18 | Drain valve DV-3 | 50.793 | -113.810 | Corrosion buildup | Med | Clean & inspect |
| 19 | Pressure gauge PG-7 | 50.795 | -113.808 | Calibration drift | Low | Recalibrate |
| 20 | Access platform rail | 50.796 | -113.809 | Paint peeling | Low | Repaint scheduled |
4×
Faster reports
90%
Extraction accuracy
Every time
Consistent format
How it works
Capture
That's the entire field workflow. No forms, no clipboard, nothing to retype at the office.
Works offline
No signal? Keep working
GPS-stamped
Every finding geo-located
Auto-sync
Uploads when you're back online
Process
Inspekto reads your photos and audio, extracts the technical data and fills your report template field by field. Same structure, every time.
Your current template
Same fields, same format, same file
90% extraction accuracy
Defects, IDs, nameplates, corrosion
AI recommendations
Suggests priority and next action
AI Recommendation
Visible corrosion on pipe surface. Schedule maintenance within 2 weeks.
Deliver
By the time you're back from the site, it's on the dashboard waiting for your final review and export.
Excel, Word & PDF
Export in any format
You have the final say
Review and adjust before it goes out
Team access
Everyone works from the same report
Get started
01
Get the Inspekto app on the App Store. Also available on Android through closed testing. Contact us for access.
API 570
Piping inspection
API 510
Pressure vessel
API 653
Tank inspection
02
Choose an industry template or send us yours. We set up custom templates for free.
your_report.xlsx
Ready in 20 minutes
03
Capture in the field, sync when you're back, and review the finished report the same day.
For managers
Send us the report format you use today and we will import it into Inspekto. Inspectors see the same fields. Clients receive the same document. 4x faster.
RiserReport_v3.xlsx
Your template today
RiserReport_v3.xlsx
In Inspekto
Live inspector locations, and every attachment plotted where it was captured. Filter by date to see equipment degrade over the years.
Aug 19, 2026
Marcos edited the inspection · 2 changes
3:42 PMJulia approved the inspection
3:51 PMJulia downloaded the report (DOCX)
3:53 PMClient downloaded the report (PDF)
6:25 PMWho edited, approved and downloaded each report, and when.
One click flags errors and inconsistencies before a report goes out.
67
Reports
87%
Auto-captured
142h
Time saved
Automation by report type
62%
Faster reports
3.4x
ROI
Track reports completed, data captured automatically, time saved and the ROI Inspekto delivers across your operation.
Pricing
Try it on real inspections
For steady monthly work
For teams processing at scale
For custom requirements
Reprocessing the same file uses another attachment. Unused allowance doesn't roll over.
FAQ
Yes. Send us the report format your team already uses and we will import it into Inspekto. Inspectors continue working with the same fields, and clients receive the same familiar document without your team rebuilding reports manually.
Inspekto can capture and organize visible information such as equipment IDs, nameplate details, corrosion indicators, defects, equipment condition and other observations needed for the report. Your team can review and edit the captured information before finalizing it.
No. Inspekto handles repetitive work such as organizing evidence, transcribing observations, filling report fields and formatting the final document. Inspectors remain in control of technical decisions, findings and approval.
Inspekto gives your team one streamlined workflow for capturing photos, voice notes and field data, even offline. It keeps everyone connected in the same workspace, organizes evidence consistently, maps information into your report templates and supports review before anything goes out. With a general AI tool, your team still has to gather files, write prompts, move data between systems and rebuild the final report manually.
We offer Free, Basic and Pro plans, each with a monthly attachment allowance. Paid plans continue at $0.20 per additional attachment when the allowance is exceeded. Enterprise pricing is available for teams with custom volume or workflow requirements.
The founders
Inspekto comes from 3+ years of Oil & Gas field inspections and too many evenings spent typing reports.
Start free with 50 attachments a month, or book a 30-minute demo.
Questions? Contact us
